Judeo Christian Veiws on God

Explain how the Judeo Christian tradition shows the goodness of God The ‘goodness’ of God, as a concept, refers to the holiness and care that god himself initiates on his people, however the Judeo-Christian tradition hold that gods attributes cannot be a ‘concept’ as god is personal, and treats all living beings as individuals.The biblical god, a completely different god than that of Plato or any philosopher, who can be seen as a ‘concept’ can be referred and described to as ‘good’ throughout scriptures through acts of kindness and his characteristics of denying those who are evil for the better of mankind; ‘You have rejected me, says the lord, your are going backward so I have stretched out my hand against you and destroyed you’ (Jeremiah 15. 6). According to this Judeo-Christian tradition gods goodness cannot have attributes of evil and portray his acts of being hard done by as help to those who need it.However this a nger is not subjected to those who have done nothing wrong, but to those who are unjust and mistreat those of equality to them. The simple understanding of gods goodness is to look at what he does, he is beneficial to his creatures and doesn’t act for his own profit, but for those on earth to create a helpful father as he wishes to be conceived; ‘I myself, said, how gladly I treat you like sons, and give you a desirable land, the most insurance of any nation.I thought you would call me father and not turn away from me’ (Jeremiah 3. 19-20). God also promises Abraham that he would be the father to the Israelites, a great nation. The goodness which is a strong participant of gods role in the bible, along with the ten commandments ‘do not commit adultery, do no steal’ and so forth, conduct a role in which those who follow the doings of god will also take on. This also helps the follower of god to feel innate and closer to god as they respond and follow h is rules with obedience.Gods acts on individual people whilst helping them, is simply for their faith to be held with him, and they believe whatever god puts forth for them to do, they shall do it as god is good, and wouldn’t want to cause intentional hurt without reason. (quote 1). God can further can be seen as having personal feelings, as he is seen to be hurt and becomes angry when people disobey his orders and when people fail to respond to his commands, for example committing adultery would be a sin against god; ‘Instead, as a faithless wife leaves her husband, so you have been faithless to me, Oh house of Israel, says the lord’ (Jeremiah 3:19 19-20).God also shows love and compassion, another two attributes to gods goodness, as he bore a son to Hannah as she prayed to him to ‘look on the misery of your servant and remember me†¦.. give to your servant a male child’ (Jeremiah 3:19-20) Although his anger and the justice he serves on those wh o disobey him are sometimes seen as mean, they are attributes to his personality as a god and believers see this as him being fair and just.He does these as comeuppance to supposed faithful ones to take advantage of his goodness, and is still seen as perfect; ‘He is the rock, his works are perfect and all his ways are just. A faithful god who does no wrong, upright and just is he. They have acted corruptly towards him, to their shame they are no longer his children but a warped and crocked generation’. (Deuteronomy 32. 4-5)       It is essential therefore, for people to respond to god’s demands with faith and obedience as god is the only one who understands and defines goodness, humans cannot understand this concept as we are tempted by evil.Having faith in god when you are poor and with nothing may be hard, but as Abraham sets example and continues believing in god, others should follow and having faith may lead them to a better fortune and not give up on ho pe. The goodness of god in the bible is represented through situations and stories told for centuries, they show his many attributes that fold into the one personality of god, to be and always be infinitely good.

Jared Diamond

The question motivating the book is: why did history untold differently on different continents? † (Page: 8, lines: 1, 2, and 3) Well, due to the fact this book covers 13,000 years of history in a brief time it Is hard to properly write a thesis that would cover everything he will talk about. For one thing he has to talk about history on different continents, why did some societies progress slower or faster than others, and whyEurasia was more advanced or modern than the rest of the world. All these things made It harder for him to write a solid concrete thesis for example I'll start with why Eurasia was typically more advanced (by modern standards) than the rest of the world. So, to start it off, most people would probably say that Eurasia probably had more environmental advantages, such as more land, rivers, trees, and other materials that are so called â€Å"essential† to a better civilization.Another reason would be the mount of resources that they had available to t hem, such as iron, might not have been enough for them to fully understand it's potential. Now let us talk about why some societies may have progressed slower or faster than other societies. Well one reason could have been religion. Religion can impact a society In many ways like technologically, politically (if they have a political system), but mainly medically.I say mainly medically because if you are a polytheist and a disease that is spreading mom to your village or town your people would probably assume that your gods and/ or goddesses are either angry or they have cursed your land, which would cause the people to not even think that there may be a cure. While on the other hand another religion like Christianity, Judaism, and Islam mentions nothing of god causing famine, diseases and other things Just because he Is angry. O they look for the reason of what Is causing the famine, or disease, and then they try to find a way to end the famine, or cure the disease. A societies pol itical views may change because of a religion, like Christianity. For example before the birth of Sis (Jesus) the Roman Empire was run by the senate and an Emperor. Tater Christianity was accepted by the pagans of the eastern Roman Empire a. K. A. The Byzantine Empire the political slowly shifted from the emperor to the Patriarch or as he would later be called the Pope. We are finally going to talk about how history unfolded on different continents.Now as you'll probably see the problem with this subject is we are not taught about hat happens In other continents such as Australia, South America, and North America, even f we are it has to start out with what led Eurasian to go there. Also they focus so much on Eurasia that they forget about the rest of the world, like at the time of the Dark ages Muslims were actually in a Golden age. We were discovering new things, inventing new things such as the first water clock, successfully performing surgeries that other civilizations had not even thought of doing.So Just cause Eurasia had the black plague going on they focused so much on one event that occurred mainly in Eurasia that they claim it was the dark age. That's like one ‘Off person saying Mondays should be holidays and majority to that world agreeing without a second thought. Finally we are done, but you're probably like â€Å"I'm lost†. That is exactly my point, the reason his thesis is hard to understand in concrete terms is because he is sort of Jumping from place to place trying to connect it all but at the same time trying to go in order.

Modern value of the gold Essay Example | Topics and Well Written Essays - 1250 words

Modern value of the gold - Essay Example The history of gold is as old as the man itself. It is considered to be the first metal discovered by man. It is considered as one of the most beautiful of all metals. Ancient Egyptians made artifacts, idols and nuggets of gold. The revolution in the history and importance of gold began with the invention of gold coins. The art was started in Egypt which slowly reached Athens in 500 B.C. This development made gold an integral part of the economy of any kingdom. A number of metal ore deposits were found in Sifnos and Thasos in ancient Greece. These metals were used for making a wide variety of goods for consumption as well as trading purposes. One main purpose for which these deposits were utilized was the preparation of gold coins. The coins were basically made of electrum which is an alloy of silver and gold. The art of coinage, beginning from Lydia, reached in Athens in 550 B.C. these coins were initially used for large scale trading purposes only. However, these coins played a number of roles in ancient Greeks later on. They provided a medium through which goods may be exchanged. Thus, an alternative for barter trade was provided. They served as a source of revenue to the state. They were also considered as a type of metal resources which were mobile and may be delivered easily. Later on, the softness and glitter also make the gold fit for the purposes of making jewellery and ornaments.

Plan for Reconstruction Speech or Presentation Example | Topics and Well Written Essays - 1000 words

Plan for Reconstruction - Speech or Presentation Example From this paper it is clear that  both the sides dedicated themselves to the cause they deeply believed in. Let us not indulge in a cost and benefit analysis of this conflict, for how could one amount a cost that is steeped in the blood of our fellow Americans, no matter on which side they fought. Let us try to forget the worst that led us to this war and remember the quintessential American sense of gumption, equality and resilience that is a coveted essential for all the future attempts at reconstruction and reconciliation. Let us dare to once again be Americans in this moment of loss and sorrow.   Ã‚  Ã‚  Ã‚  Ã‚  This paper outlines that the reporter's heart goes to our brothers from the South. It is not that they are less American. Who can deny the fact that their forefathers fought with courage, dedication and sincerity in the War for Independence. They are not only an undeniable constituent of what we reverently remember as our Founding Fathers, but a significant chunk of t he American Declaration of Independence and the American Constitution owe their origin to their timeless values and ethos. So let us once again remember the values of liberty and equality enshrined in the American Declaration of Independence, not because someone is telling us to do so, but because in the times marred by flux and turmoil, one ought to stick to something that is timeless and eternal.  We as Americans always believe that all men are born equal irrespective of their color, ethnicity and race.... Much has got ravaged, but this sacrosanct belief has thankfully managed to survive. None of you will deny the fact that our black brothers, who just a few days ago were called slaves, played a pivotal role in building the American economy, heritage and culture, with their blood, sweat and toil. Now once again our black brethren are looking towards you. They have gone nowhere. They are here to sweat with you in the immense reconstruction efforts that you need to undertake. All that they expect is the right to be treated as fellow human beings and a just and fair share commensurate to their contributions to the American way of life. Reconciliation with our black brethren is not only in consonance with our values, but also makes a sound economic and political sense. The Former Slaves All the efforts at reconstruction will be futile, unless we not extend our heartfelt apologies and regrets to our emancipated black brethren. I must say that none of us knows the meaning of freedom better t han them. Freedom is not something that solely belongs to the domain of constructive philosophy. Freedom is actually the basic instinct of humanity. Nobody teaches to birds the meaning of freedom, yet even they do understand what it means to be free and liberated. Hence, they who had been denied freedom for generations on the basis of economic and commercial premises are the ones who deserve to be free now. I know that the injustice perpetrated against you was not only a social failure, but a bigger systemic flaw in the institutions brought into existence by such a society. The memories of the Dred Scott decision by the Supreme Court, which deprived a whole race residing in the US for generations, of the right to be called a citizen are still fresh

Electronic Business week 7 Essay Example | Topics and Well Written Essays - 250 words

Electronic Business week 7 - Essay Example The value created by the organization is the variance between consumer’s apparent use value from the services of the company and the organization’s cost of offering the services. The company creates use value through quality, brand and speed. The company ensures that its services are of high quality and contain attributes such as reliability and satisfaction. On the other hand, the company ensures that it responds fast to customer calls and that waste is collected at an agreed time (Waste Management, 2014). Additionally, Waste Management creates value through creating a brand with traits that customers can relate with such as trust. In order to capture sections of the value created, the company ensures that the value created is greater than that generated by rivals, and also ensures that it is defectively imitable and transposable. Needless to say, Waste Management captures the value it creates through its economic profits. Since profitability is the company’s primary strategic goal, the company positions itself with price and cost (Waste Management, 2014). Notably, the value captured by any organization is the variation between the incurred costs and the price charged for

The History of Religion and Religious Conflict Essay

The History of Religion and Religious Conflict - Essay Example In this light, religion can have many positive influences, it can uplift the soul, spur on artistic production, and cause people to lead more driven, purposeful lives. On the other hand, however, religion has also shown that it can be a destructive force on many different occasions. In his work, â€Å"The Art of Happiness,† the Dali Lama makes many claims about religion, but seems to fundamentally believe that religion has always been a positive influence on the world, saying, for instance, that â€Å"all world religions have, of course, provided tremendous benefit for millions of human beings throughout many centuries past† (Dali Lama, 296). When considering this claim, it is easy to oscillate drastically to one side or other of this argument. Someone seeking to defend religion would point at the acts of Mother Theresa, to the charity of religious organizations, and to the benefits that organized religion can give to people personally, such as peace and comfort. Detrac tors from religion, however, can point to the attacks of Sept. 11, or the Crusades, and decry religion as a destructive force that causes hatred and violence throughout world history. Neither of these answers are fully correct, however. Rather, religion often does not make a significant amount of difference in and of itself. Religious actions, either positive or negative, are often results of complex societal interactions rather than religious fervor: so the Dali Lama is incorrect, as I believe that religion has not been a consistently positive nor negative influence on the progress of world history. One of the first things that must be understood in this discussion is the relationship between religion and spirituality. Though these are very closely linked ideas, â€Å"the Dali Lama distinguishes between spirituality and religion† (294). This is because spirituality and religion happen on very differ planes – spirituality is a personal, though often sometimes communal thing, that has to do fundamentally with belief in the underlying structures of the world, and one’s place within them. Religion, though resting on spirituality, is a very different thing. It is a structured organization that codifies beliefs and practices, almost like creating rules and laws for spirituality. This difference is important because many of the impulses often attributed to religion may in fact be spiritual. Altruism, for instance, is often one of the things most lauded about religious people and institutions. But there are obviously many people who are altruistic without being religious – they do good out of a fundamental belief that it is good to do so, which is much more akin to spirituality than religion, while there are also certainly religious people and institutions that are far from being altruistic. So when analyzing the impact that religion has had on the world, one must isolate the religious side – the order and structure of beliefs and a ctions, from the spiritual side. Upon parsing the actions of a religion or religious institution from the actions based on spirituality, one might be immediately drawn to condemning religion whole-heartedly. Religions and their institutions have been guilty of many grave sins that immediately spring to mind. Current, organized Islamic leaders have called for terrorist attacks and Martyrdom, and the Westboro Baptist Church’s â€Å"God Hates Fags† campaign has disgusted people worldwide, many churches in the United States were associated with hate crimes against blacks during and before the civil rights

Smart Growth Anthony Flint Essay Example | Topics and Well Written Essays - 1000 words

Smart Growth Anthony Flint - Essay Example Planning for the growth of contemporary towns entails early preparation of its entire infrastructure. Urban developers focus on the developments of their towns in aspects that will enhance growth. Sustainability is a significant element during planning for the growth of cities. This is because planners succeed when they ensure that their infrastructure is sustainable. This also implies that appropriate leadership ensures that planning of any project benefits several people. This kind of leadership is likely to establish several policies that facilitate development of practical procedures. For example, the political leadership of a state could create policies that encourage its entire citizenry to acknowledge the value of development. Such policies include the establishment of commissions that focus on developmental issues. The commissions also identify suitable human resources that will ensure the design of creative plans (Randall & Weber 78). There is need for proper legislation that will enable the entire planning of modern towns to be effective. Such legislation is effective because it passes Acts that tend to support the growth of infrastructure. The presence of growth management plans is an essential inclusion in planning strategies. This is because the plans help experts to ensure there is a systematic execution of appropriate strategies that enhance development. These strategies include intentional initiatives that attempt to assess the potential development of infrastructure in several places. Others include the preservation of landscapes that is funded by transfer of taxes from estates. The issue of taxes is fundamental because it helps planners have adequate funds for their various operations. Insufficient funds tend to derail all the procedures that attempt to grow modern towns (Williams 49). Incentives are fascinating ways of encouraging both experts and citizens to

Critical Assessment and comparison of the Competitive and Essay - 2

Critical Assessment and comparison of the Competitive and Profitabbility of UK food retail Sector and the UK Oil and Gas Sector 2006-2010 - Essay Example Each company belonging to different sector has different nature of business, market conditions and regulations, therefore it is not appropriate to compare financial performance of companies from different industries or sectors (Helfert, 2001); In this report, the author has used various financial ratios in order to compare the financial performance of companies selected for analysis. The financial ratio analysis includes the comparison of the financial performances of the UK three companies from retail sector and three companies from oil and gas sector. In this regard, the following are the ratios which have been considered to conduct the analysis: In order to analyse the liquidity position of the selected companies over a period of five years, current ratio and cash ratio have been determined for each company for each of the five financial year under consideration. By determining these ratios, it is possible to analyse the ability of companies being analysed to pay off their liabilities (Helfert, 2001). The ratios used in this regard include current ratio and cash ratio. For determining the profitability of the selected companies, profitability ratios have also been considered. The ratios included in this analysis are â€Å"return on capital employed† (ROCE) and â€Å"return on equity† (ROE) (Helfert, 2001). The return on capital employed shows the overall profit earned by a company while making use of its total capital or resources. On the other hand, the return on equity shows the profits earned with respect to total equity held by a company (Helfert, 2001). Debt ratios are determined to analyse the performance of the company in relation to its debt and the composition of debt in its capital. The report includes following two ratios to evaluate the debt composition of the companies and operating cash flows with respect to total debt of the company (Helfert, 2001). The formulae for these two

Applying Balanced Scorecard Assignment Example | Topics and Well Written Essays - 250 words - 1

Applying Balanced Scorecard - Assignment Example First, a balanced score card can be used in the financial category to help evaluate information on key financial performance measurements. Such measurements include: risk assessment analysis and cost and benefit analysis. Secondly, a balanced scorecard can help the organization assess their performance when it comes to the business process. A business scorecard gauges how a company is running when compared to the organization’s mission. As far as the learning and growth perspective of an organization is concerned, a company can evaluate its performance using two measures. First, the availability of trainers and mentors in an organization and secondly, the availability of help if needed by the employees. In the customer category, metrics on evaluating a customer’s satisfaction are crucial in monitoring the organization’s performance. In this category, questionnaires can be used to evaluate customer’s satisfaction. Customer complaints should also be checked, as this will definitely have an impact on future business

The Importance of the Religious Right in Us Politics Essay Example for Free

The Importance of the Religious Right in Us Politics Essay This does not apply only to republicans, however. JFKs inaugural speech in 1961 consisted of many religious elements, as did Barack Obama’s speech in 2009, in which he spoke of ‘the knowledge that God calls on us to shape an uncertain destiny†. Many presidents have ridden to power on the back of religion. Presidents that appeal to the ‘three Fs’, faith flag and fail, or e ‘three Gs’ God, gays and guns, are favourites among the American people. President Bush directly appealed to theses interests and 79% of evangelicals voted to re-elect Bush. Candidates such as Hilary Clinton, who ran for the Democratic candidacy, didn’t achieve success as it could be argued she did not play heavily enough on the concept of religion. John McCain did not appeal directly to the three Gs or Fs so it could be argued that this was the reason he failed to beat Obama in 2008. One of the most important influences of the religious right is it’s infiltration in the republican party through the up and coming far-right movement know as The Tea Party. The TPM started life as a fiscally conservative group that believed federal government was too big and was spending too much. As the movement gathered support, it started to take on social issues, many of which were influenced by the religious right, as they took heavily conservative positions. Many Tea Party candidates influenced the 2010 mid-term elections as they have voted in and took away the democratic majority in the congress. The tea party has removed the right wing of the Democrat party as they have pulled the Republican Party further right as they defeated many ‘Moderate’ Republican candidates. The religious right have also had a big influence in the media, through the Christian Broadcasting Network (CBN) which supports and publicises candidates that support their views. Therefore, I would argue that the ‘religious right’ is highly influential in politics as they have recently made the republicans further right and the democrats further left. This has split American politics and made the parties different in their ideologies. For instance, they have also created conditions where the religion of a candidate is important in terms of the elections. The religious right has therefore broken the founding fathers wish to keep politics and religion separate.

Looking At Wireless Power Transmission Information Technology Essay

Looking At Wireless Power Transmission Information Technology Essay Wireless power transmission is the process of transmitting electrical energy to an electrical load, from a source emitting power without interconnecting wires. The wireless transfer of electromagnetic energy as in different forms like audio format, video format and data format is common nowadays but wireless power transfer technology is still years ahead. Even though the idea was developed 100s of years ago and scientists are still working on the topic an efficient way for wireless transfer of power is yet to be developed. The development of highly efficient WPT technology will be a breakthrough in the history of wireless transmission as it allows lots of portable devices to be charged without plugging on to a socket or docked to a charging station. The development of WPT serves to be useful in many ways, as transmission of power in hazardous environment is inefficient and dangerous. The WPT differs from the wireless transmission of telecommunication signals as the WPT takes into consideration the efficiency parameter where as in the latter the energy parameter is significant only if the signal is distorted in such away that it cannot be distinguished. The WPT is economical if and only if the receiver receives the same amount of energy transmitted by the source. The direct induction method is the most common method used for the WPT and is being used for short distance WPT, but it had disadvantages and was overcome by later technologies developed like the resonant magnetic induction method, electromagnetic radiation methods like microwaves and lasers. The modern era where the ideology of high efficiency in practical circuits comes to existence, the WPT technology proves wrong due to the low efficiency of the developed technologies. The WPT technology in industries by electromagnetic radiation is possibly only remote in the design and most of the industries are looking forward for better designs for better efficiency in power transfer. Most of such design lags the property of safe human environment for living and the economical barriers. A design of WPT system which overcomes these factors is still to be worked out and is being experimented throughout the world. Why Wireless Power Transmission (WPT)? The studies throughout the world has proven that most of the electrical energy transfer is done through the interconnection wires and lots of energy is lost during the transmission due to various internal and external factors like the resistance of the wires the material of the conduction wires, the size of the wires, the atmospheric conditions like temperature, humidity etc. On an average basis the loss of power due to transmission through wires is calculated to exceed to be more than 30%. This is where the WPT comes into action , the WPT is highly reliable, fast , low cost for the maintenance and can also be used for short range and long range distance transmissions. These factors pop-in the idea for WPT. History of WPT The WPT history can be traced from the early 19th century. The first electromagnet was developed in the year 1825 by William Sturgeon which paved the way for the discovery of principles of magnetic induction in the year 1831. This was followed by the demonstration of transmission and reception of electrical energy without wires to connect the point of origin and termination by Nicholas Joseph Callan using the above two developments. These experiments even though demonstrated was successful but in practical cases was always kept under suspicion which was due to the interpretance that it was not possible for long distance transmission and fear of safety. The invention of transmission of very and ultra high frequency radio waves dedicated to Heinrich Hertz followed the revolutionary development of the wireless electricity transfer by Nikola Tesla in the year 1891, on which he took the patent-ship for illuminating the bulbs wirelessly. Nikola Tesla is called as the pioneer of the induction techniques as his technique was based on induction method. His vision of WORLD WIRELESS SYSTEM which inculcated the idea of people accessing the free energy. He even planned to set working a 187 feet tall tower for broadcasting energy but was put down due to lack of funds. The experimentation in early 20th century was successful in transmitting power over a distance wirelessly but was not able solve the problem of power loss due to hindrances. In the 19th century WPT passed through various phases of technological developments. Even after 100 years the idea of Tesla is being used by the MIT scientists led by Soljacic for their project named WiTricity. Different technologies of WPT Near-field techniques: The techniques for short distance transmission of power wirelessly. Mostly the induction methods are used for near-fields. These techniques are as follows. (1)Inductive coupling Electromagnetic induction is a process whereby a conductor placed in a changing magnetic field results in the production of voltage across a conducting plate. This voltage in-turn generates an electrical current called the induced current because the current on the second conductor is induced by the first. In the inductive coupling technique the primary and the secondary are not connected by wires but the energy is transferred by mutual induction. Mutual induction refers to the generation of EMF in circuit due to a change of current in nearby circuit. Electromagnetic increases with the increase in current, the voltage in the conducting plate responsible for the magnetic fields and also the increase in the frequency. The energy is transmitted from the conducting plates which is responsible for the fields to another conductor termed the secondary where the fields impinge on. A part of the energy on the primary is passed inductively through space decreasing the energy in the primary and imparting energy into the secondary. High frequency currents are not liable to pass the current for long distances but transfers energy by induction rapidly to the adjacent or neighboring conductors. Lower the frequency of the current less preponderant becomes the effects of induction. The phenomenon is classified more local, if the energy decreases rapidly in the circuit causing the current in the circuit to die-out. In the space outside the conductor the phenomena results in dielectric stress and steady magnetic condition for continuous current and alternating for alternating current input. For the telecommunication channels the magnetic and electric fields outside conductor is only considered for the transmitting and receiving of messages. Transformer working is the simplest example for WPT. A current which is varying in the primary generates a varying magnetic flux in the core of the transformer which results in the varying magnetic field in the secondary. This field induces a varying voltage or EMF(electromotive force) in the secondary. This is termed as mutual induction. It should be noted that most of the energy transferring devices are usually air-cored. There are many examples of air-cored devices, such as the wireless charging pads, electric brushes etc. Induction coupling is the underlying principle of charging of an electric toothbrush. The input current through the primary winding creates a magnetic flux thus a magnetic field. When the toothbrush is placed in the charger, a current is induced in the secondary by the magnetic field, which is connected to the batter of the brush and thus recharges the battery. The wireless charging of the portable devices of great advantage as it is comfortable to use, shock proof and less usage of wires which is more economical. The figure() shows the picture of an wirelessly charged toothbrush. The principle to recharge several devices at a time is similar to that of the charging of electric brush. The Splashpower recharging mat and Edisions Electric PowerDesk are few examples. The WCP (wireless charging pads) are devices that are devised for the charging the battery automatically when placed on it. There is no connection with the wires between the charging pad and the device battery to be charged. The technique of induction to transfer energy is utilized in this and air acts as core. Resonance Inductive Coupling It is the combination of resonance principles along with the inductive coupling principles. When a relatively low frequency close to the same frequency of vibration as the natural frequency of system being resonated produces large amplitude of vibration it is called resonance. Two objects or bodies are made to strongly interact with each other during the time of resonance. It is also noted that an objects physical structure determines the natural frequency of vibration of the object. Objects vibrate more easily at resonant frequency than at other frequencies. We know that magnetic flux developed due to the passage of current in the primary creates a magnetic field which induces an EMF in the secondary and thus current was the principle of inductive coupling. Working principles of Resonance Inductive Coupling. The coil in the fig() provides the inductance when the circuit is supplied with voltage. The induction takes place in a slight different manner when the electromagnetic fields surrounding the coils start to resonate in the similar frequencies. The inductor used here is a curved coil wire. We also see a capacitance plate attached to each end of the coil to hold the charge, that is a capacitance, is connected in parallel to the coil on both sides that is the primary and the secondary coil. When electricity is passed through the coil the coil begins to resonate. The resonating frequency is the product of the capacitance of the plates and the inductance of the coil. Electricity which travels alongside the electromagnetic wave tunnels from the source coil to the target coil, if both of the resonant frequencies are the same, where resonance is a function of the product of the capacitance connected in parallel and the inductance of the coil. Loss of energy or power due to radiation is negligible in this case. If the two coils to be linked are out of range of one another, there occurs no transmission of power as the fields are not strong enough to affect the surroundings. This is the same affect when two coils which are resonating at different frequencies exists. Considering two coils resonating at the same frequency to be in the same range, energy streams moves from the transmitting to the recipetant. This theory also provides the functionality of more than one receiving coil in the same range operating at the same resonant frequency to function. This type of energy is termed as NON-RADIATIVE ENERGY TRANSFER as it involves the static fields surrounding the coils more than the fields spreading in all directions. Advantages of Resonance Inductive Coupling (RIC) over Inductive Coupling Compared to inductive coupling the efficiency of RIC is very high. The range of RIC is much greater than compared to the inductive coupling, range for inductive coupling is below 5 cm whereas for the RIC it in the range of few meters. The directivity of the RIC is larger compared to the inductive coupling. RIC can implemented in one-to-many format, but the implementation of inductive coupling is generally one-on-one format. The devices implemented using RIC are easily portable compared to that of the inductive coupling gadgets. This is because of the small size of the component structure and the ease to use. Air Ionization Ionization of air refers to the process of imparting charges that is negative or positive charge to the air molecules by the application of high voltage. In this method of transferring the electricity, the charged particles that are the anions or cations move from the source to the target terminal through the atmosphere, by imparting charges to the air molecules. This technique even though seems to be simple in construction, it is the most toughest and un-economical method of transfer of power in the near field techniques. The disadvantages are really more in this technique because minimum field strength of 2.11 Megavolt is required to transfer the electricity over a distance of 1 meter, which is very high potential difference to be created. There should be a static atmospheric condition for this technique to be implemented and mostly the dust particles in the atmosphere can also affect the transfer of electric power, from one terminal to the other terminal. The natural example is the lightening which occurs. So taking into consideration all the negative points which overcome the advantages, it can be concluded that Air ionization method for wireless energy transfer is not feasible for implementation. Advantages of near-field techniques The absence of wires is being considered as the greatest advantage. There is no presence of e-waste. The need for battery is suppressed to a certain extent. Efficient energy transfer using the RIC up-to a distance of few meters is possible. The methods are harmless, if the strength of the fields used are under safety levels prescribed by the standards prescribed. The maintenance cost is considerably low for the devices in the near field techniques. Disadvantages of near-field techniques One of the main disadvantages of the near-field techniques is the distance. This technique implies the wireless transfer of energy only for a short distance. It has to be taken care of that, the strength of the fields developed should be below the safety level so that it does not affect the human safety. The initial capital for setting the circuit is considerably high. The tuning of the RIC circuit is a difficult task and consumes more time. The signals to the supply should be having high frequency because the induction is proportional to the frequency of the signal supply. The air ionization process for the near-field technique is not a feasible technique that can be implemented for the wireless transmission of energy. Far-field techniques for wireless power transmission Far-field techniques for WPT refer to transfer of power from one terminal to another terminal which is kept far apart. The techniques used for near-field transfer are not viable because the efficiency will be tending to zero or almost zero if implemented by those techniques. That is the power received at the receiving terminal will be zero. There are mainly two types of techniques used for the energy transfer in far-field techniques they are as follows Microwave wireless power transfer The electromagnetic waves that are arranged in between the infrared spectrum and the radio wave spectrum are termed as microwave. Their frequency ranges in from 300 Mega hertz to 300 Giga hertz. They are used for a wide range of applications such as Bluetooth, wifi, microwave Owen etc. The frequency range of microwave is in between 1 and 40 GHz which is generally used for applications. For long distance transfer of power, microwave is one of the best medium used. The microwave band is generally used because antennas of convenient sizes that are able to transmit and receive the microwave signals and also the metal waveguides for carrying the radio power works are available. Besides this the technologies in electronics where millimeter waveband is required the microwave proves to be helpful. This is because in millimeter wavelengths the radio waves are attenuated while the microwaves are not. The microwave was used for transmission of power for various applications such as running of the unmanned helicopter developed by Americans, powering the outer space vehicles etc. There are mainly three steps involved in the transmission and reception of power by MPT. Step1: The conversion of electrical energy into microwave. After this process the microwave is emitted with very-high power emitters called the cavity magnetrons. Step2: The microwave is then captured using a rectenna. The rectenna is a combinational circuit consisting of rectifier and an antenna. Step3: Microwave energy is converted to electrical by the rectenna. In the process of transmitting microwave, the AC supply needs to be converted to DC as it is not possible to convert the AC directly to microwave. The process of conversion of DC to microwave is done by magnetron. The magnetron is a highly powered vacuum tube structure that is responsible for the production of coherent microwaves. The rectenna can also be called as rectifying antennae as it converts the microwave directly into DC electricity. Rectenna consists of elements that are sorted in multi element array and consists of pattern reflector element mesh to give directionality. It is easily constructed by placing Schottky diode in between the antennae dipoles. The DC is converted back in the next process using an inverter circuit. Considering the receiver to be a photovoltaic cell, the microwave system for earthbound applications exceeding an area limit of diameter size 10 Km the arrays in the receiving station has large power levels in total , limiting the exposure of electromagne tic radiations which is considered for human safety. A density of power equals to or less than 1mW/cm2 is considered safe for human environment, and with this density of power for a diameter of 10 km 750 megawatts of power can be generated. This standard value is utilized by several modern power plants in the world. Laser transmission of power A device emitting electromagnetic radiation by the process of optical amplification on the basis of stimulated emission is termed as laser. Laser has high directivity and high degree of temporal and spatial coherence which is a unique property of laser that cannot be attained by any other technologies. The laser beams does not get dispersed for long during the time of transmission. The disadvantage of the laser is that it gets attenuated while propagating through the atmosphere because of hindrance due to the dust particles prevailing in the atmosphere. The receiver designed for the laser power transmitter and receiver is simple in design and construction. The laser system is a cost efficient system due to the simple design and structure. These points form positive side for the implementation of the laser system. The receiver in the case of laser system is a photovoltaic cell. The laser system is mainly used when electromagnetic radiation in the spectrum near to visible region that is 10s of nm or microns are to be transmitted, power is transmitted changing electricity in the form of laser beams and then projected onto a photo-voltaic cell which acts as the receiver. The receiver then turns it back to electricity. This is called the power beaming mechanism. This is so called because power is forced or beamed at the receiving end to convert the power into useful electric energy. The fig() shows the concept how laser is used for transferring the power to an object in the sky. Here it represents flying objects battery being charged by controlled transmission of laser beams, tracking the object with the help of the radar, and powering the target with the help of laser generating source. Comparison of Laser and Microwave techniques Laser method requires antennae of smaller sizes compared to that of the microwave technique of power transfer. Microwaves interferes with each other where as laser is highly monochromatic and does not interfere (two frequencies used for microwave power transfer are 2.45GHz and 5.4 GHz). Laser gets attenuated and also diffracted due to the particles present in the atmosphere, but microwave is resistant to this. Transmission of energy over a long range is possible due to property of collimated monochromatic propagation of wave-front in lasers but the range of microwave is small considered to lasers. The receiver size of the laser technique is small considered to the microwave method because of the compact size of the photovoltaic components. The laser beams does not affect or interfere the normal radio communication due to the large difference in their wavelengths, but microwave as it has wavelengths closer to that of the radio communication channel wavelength the possibility of interference is more. The photovoltaic cells in the laser receiver is not as efficient as in the microwave receiver as in laser, only 40%-50% efficiency is only acquired. Advantages of far-field energy transfer Far-field energy transfer is more efficient. The need for setting substations, grids etc are eliminated due to the large distance transfer ability. These systems require less maintenance cost compared to the wired system of energy transfer. The systems become more and more effective if the transmitter and the receiver are along the line of sight. This system can be implemented in remote locations where access is difficult. Disadvantages of far-field energy transfer techniques This is radiative in nature so the losses are prevalent due to the radiations. In order to be more effective in working the transmitting and receiving stations must be in line of sight. When lasers are used: (1) conversion to electrical energy is inefficient at the receiver. (2)absorption loss is high due to the atmospheric particles which causes attenuation and diffraction in lasers(3) difficult to use in human environment. When microwaves are used (1) interference of two power signals (2) standards should considered for the sake of healthy living environment. Applications Near-field energy transfer Electric automobile charging The automobiles running on electricity are more common nowadays as it more environmental friendly, but the storage capacity of these vehicles are limited as it cannot afford huge batteries, so similar to the petroleum bunks, rises the concept of recharging stations. But these recharging stations cannot afford large number of plug-ins, as the density of vehicles increases besides it is a waste of time working with plug-ins in this busy and fast world, so wireless recharging of the vehicles is done in these situations to avoid waste of time and energy by near-field techniques, besides all these many vehicles can be recharged at a time using resonance inductive coupling. Consumer electronics In the world of consumer electronics, the technology changes are really fast. Each technology brings in more compacability and introduces more functionality into the products being manufactured. Such a world essentially requires the introduction of the wireless charging, because it reduces the cost of the wires plugged on to it, increases the reliability of use of the equipment, reduces the total size of the equipment and increases the ease of portability etc. Inductive coupling or resonance Inductive coupling techniques prove to be useful in these cases. Example is electronic toothbrush charger, splash power recharging mat etc. Industrial applications In industries there are processes involving high temperature, hazardous environment created by chemical reactions etc. In such an environment if wires are used for the transfer of electricity if required, it is highly inefficient and at times dangerous, so in such cases only the wireless transfer of electricity is possible, the methods of inductive coupling and resonance inductive coupling proves to be efficient because the hazardous environment or the high temperature does not affect the transfer of energy wirelessly. Far-field energy transfer Solar power satellites In this era of growing need of energy, our mother earth with all its resources may not be able to supply enough energy for the utilization for mankind, besides the energy earned from coal, oil etc are causing pollution besides this, these non renewable sources of energy. So in order to satisfy human needs one of the latest technologies for energy harvesting is the solar power satellites. These are machineries working on the basis of the microwave and laser power transmission methods. These helps to efficiently make use of the solar energy, and are placed in geostationary orbits for the efficient working. Solar energy is captured using the solar cells on the satellite; where in 400 million photocells are present in each solar power satellite. The energy is converted to microwaves or laser and transmitted to the earth and received at the earth station using the rectenna or photovoltaic cell converts it into electrical energy. The efficiency of the microwave system is more than 95% usually, but for the laser power transfer system the efficiency is around 40% to 50%. The diagram in the fig() shows the working of the solar power satellite and how it transfers power from the supply terminal to the receiver terminal by microwave method of power transfer. This is also called BEAMING DOWN process. Energy to remote areas In remote location that is places that cannot be accessed easily by people, the transfer of energy by using grids are considered to be waste of money, time and energy. In such cases the transfer of energy through wireless media is only possible. Certain factories which produce hazardous wastes, confidential or secret services offices and plants of nations etc are sometimes located in remote locations are the examples. There are villages to be supplied with electricity located in remote locations government of nations are planning and implementing far-field techniques of power transfer to meet these tasks. Energy broadcasting globally The concept of energy broadcasting globally had bought in nations to work together in projects dealing with more efficiently trapping of solar energy to power up their resources. As solar energy is renewable source and available in plenty the only step left behind is more efficient way of trapping the solar energy. The achievement of this would certainly result in reducing the crisis of energy, and to broadcast the energy globally. One of the famous projects undertaken is based on Kalams (former Indian president) vision which calls in the program for space-farming to contribute substantially for the global energy broadcasting. One such proposal is Pan African e- network. Projects established on the basis of wireless power transfer. Wi-Tricity This was a project done in Massachusetts Institute of Technology on wireless transfer of energy based on the resonance inductive coupling method. The team was led by Marin Soljacic. The team was able to transfer energy wirelessly for a distance of 2m. The coils used for the experiment was helical in shape and they never used any capacitor in the experiment. The energy received at the receiving terminal was almost 40% of the total input power from the supply. The frequencies used for the transmission of power were 1MHz and 10MHz. The field strengths were safer at 1 MHz frequency for the human environment. The usage of 10MHz frequency, created fields of strength above the ICNIRP (International Commission on Non-Ionizing Radiation Protection) standards. Rectenna in US The rectenna build in USA worked on the microwave method of wireless energy transfer. The rectenna which was spread over one and half mile in was diameter was able to generate electric power of 5000MW. The range of frequency of microwave used is compactable to the ICNIRP standards. Alaska 21 WPT can be used for supplying power to rural areas. Alaska 21 project was presented in the year 1993, for supplying power to villages in Alaska. The other sources of energy were not possible to be used because of the limited infrastructure. The price estimate of $40/kWh was done for energy produced by other sources, which is too high to accommodate. Even cabling to this area was not possible due to extremes of climatic conditions. So a pilot project was conducted which was passed on WPT, not only to supply energy but also to avoid pollution. The system consisted of 2.45 GHz design array and could bridge around 1 to 15 miles. Present status is unknown. Grand Basin project This project aims in supplying electricity to an isolated mountain village in the remote area of the La Reunion Island. This project was developed for making Grand Basin to a tourist village. The project was given complete support by CNES, which is the French space centre. WPT was used as the underlying basis of the project. Planning to build a microwave link which operates at 2.45GHz frequency working over a distance of 700 meters delivers 10kW and had an efficiency of 57%. The whole system worked in combination with the photovoltaic panels and the batteries. Capital of 1 million dollars for 10 kW was proposed and the project was put down. WPT Demonstration in Hawaii In the year 2008 on moth of May a demonstration based on WPT was held on the islands of Hawaii. The demonstration was organized by one of the US based companies named Managed Energy Technologies. They were able to demonstrate wireless power transfer up to a distance of 148 km. They were only able to transfer 20 watts of power, which would barely light a fluorescent lamp, because most of the energy were lost during the time of transmission. The limitation of this demonstration was not the science but the capital involved. This project involved less than a million dollar. If the company could have afforded more number of solar panels and more phased transmitter array and receivers more than 60% of efficiency could have been acquired. Munich electronica exploration The Munich ELECTRONICA exhibition organized by the automotive, embedded, electronica and the ZEVI forums in the month of November from 9th to 12th in Germany was a real trade off for the electronics products. There were 2595 companies participating in the exchange and almost 70000 visitors took part in the exhibition. The exhibition is being conducted every two years alternatively to the Productronica. There were participation of various companies dealing with different types of electronic goods like the displays, connectors and interconnects, semiconductors, automotive, sensors, passive components, assemblies and sub-systems, wireless, embedded systems, power supplies, test and measurement etc. It is one of the best places where we come to know about different technologies, products and even test the new product to confirm our expectation. The fair also is business area where companies come for advertising and selling their products. I was able to visit stalls of 37 companies dealin g with power supply devices and gathered informations which I was able to present on the topic wireless transfer of power. Certain companies were doing research works on this topic but were not able to introduce their products because certain defects were yet to be cleared before manufacturing. Companies visited RRC Solutions The company was established in the year 1989, with the excellent management has become one of the leading companies in the supplier of power supplies and battery chargers. It has a good platform for the professional applications in medical, industrial, military and consumer products. The company has good wealth of expertise engineers creating new and innovative ideas. The company has its branches in various locations of the world with its headquarters in south west Germany. Its branches are located in USA, Japan, China, Hong Kong etc The companys products involve battery chargers, power supplies, integrated system solutions, products

What is the Caribbean? :: Geography Caribbean History Islands Essays

What is the Caribbean? Many ask themselves, What is the Caribbean? What makes up the Caribbean? and How has each island created their identity due to their history? Sidney Mintz in the article, "The Caribbean as a Social-cultural Area" approaches a more social interpretation, Antonio Benà ­tez-Rojo in the article "From the plantation to the Plantation" approaches a more humanistic interpretation while Michelle Cliff in her novel Abeng and her article "If I could write this in fire" takes on a more personal view. While both Mintz and Benitez try to interpret for the whole Caribbean, Cliff uses her homeland of Jamaica to help point out or disagree with some of the important issue of the Caribbean. Benitez discusses the Caribbean according to the role of the plantations. Mintz follows a guideline of nine major features and Cliff's use of personal struggle to better understand her identity and use of Jamaica's history help to better understand Jamaica as part of the Caribbean. The first similarity of the Caribbean which Mintz points out is how the historical conditions are well known. He writes, "They consist in the expansion of Europe to the New World, the common historical patterns of conquest. colonization, peonage or slavery, and the development of multi-racial and multi-cultural societies throughout this area" (19). Benitez-Rojo goes on to be more precise, he writes, "So if it's clear that there are certain regular and common features, held in place by experiences more or less shared- European conquest, the native people's disappearance or retreat, African slavery, plantation economies, Asian immigration, rigid and prolonged colonial domination..." (34). Even though both Benitez and Mintz can make these claims because it is proven in history, Cliff writes on behalf of Jamaica's history due to Spain's discovery and conquest. Cliff challenges the readers to think more about the identity of Columbus, she mentions that Columbus may have been a Jew, "He ca me from Genoa- perhaps entering Spain as a Marano, that group of Sephardic Jews forced to hide their religion and their identity behind a pretense of Christian worship... was he in search of a safe place for Jews, a place out of the Diaspora" (67). Cliff has made readers think twice on the purposes of why these sailors discovered new colonies. She writes, "For what purposes did these men find themselves on their expedition. So many intertwining to be unraveled" (67). She implies that the history is not as straightforward as Mintz and Benitez mentioned.

Heart of Darkness, Hollow Men, and Apocalypse Now Essay examples -- Mo

Similarities between Heart of Darkness, Hollow Men, and Apocalypse Now      Ã‚  Ã‚   In today's literary world there are many different texts that have interlocking literary meaning through their references to one another and to other works. I am going to compare and draw similarities between T.S. Eliot’s The Hollow Men, Joseph Conrad's Heart of Darkness, and Francis Ford Coppola's Apocalypse Now. These three sources have many different references to one another in different ways. In T.S. Eliot's The Hollow Men, he begins the poem with the title and underneath the title he uses the famous line "Mistah Kurtz- he dead" from Joseph Conrad's Heart of Darkness. This famous line is said by one of the servants about Mr. Kurtz who dies and all of the natives were shocked by his death. Eliot uses this line at the beginning of the poem because he is drawing a comparison between the hollow men and Kurtz. He does this because Kurtz's idea of the civilization that he wanted to create didnÕt turn out the way he wanted it to in the end. Kurtz's ideas lead to his downfall in the movie Apocalypse Now. He is also considered as being hollow himself because of his ideas and inability to face reality. This is similar to the hollow men because they don't know what they will turn out to be. They have an idea of what they want to be but they know that will never happen. The hollow men really have no choice what they will be; they just let it happen. These hollow men are waiting t o go to "death's dream kingdom", but they donÕt know if they will ever get there. Eliot talks about these hollow men and these men can be compared to the people who are following Kurtz. They are all hollow people because they are following this radical figure and do not have i... ...Hollow Men. They show many similarities and there is reasoning behind the scene in the movie Apocalypse Now; where Kurtz is reading Eliot's poem. It all is tied together and has specific meaning. It shows that different literary sources can be used to help out other literary texts. Conrad's Heart of Darkness lays down the foundation of the character of Mr. Kurtz and then Eliot and Coppola portray this character through their pieces of art. Their literary meanings tie all of these works together to make them all unique in their own way. Works Cited Conrad, Joseph. Heart of Darkness. Norton. New York. 1963. Eliot, T.S. The Hollow Men. 1925. Jain, Manju. A Critical Reading of the Selected Poems of T.S. Eliot. Oxford University Press. New York. 1991 Southam, B.C. A StudentÕs Guide to the Selected Poems of T.S. Eliot. Faber and Faber. Boston. 1968.

Book Review Moral Leadership: Getting to the Heart of School Improvement By Thomas J. Sergiovanni :: essays research papers

The heart of leadership has to do with what a person believes, values, dreams about, and is committed to. - Sergiovanni Summary Target Audience of the Book: According to the author in the introduction of the book, this work was basically intended to serve as a guide for developing moral leadership in schools geared toward superintendents, supervisors, principals, and any other persons at the upper levels of school management. The author's design was to provoke thoughts and raise questions in the minds of these people to help them analyze the leadership processes in their schools and help them make adjustments to the leadership process that will in the end reduce the need for "direct" leadership in favor of "moral" leadership. He also makes point that this book can serve as a "counterpoint" to some of the textbooks, currently being used in university courses on leadership. Sergiovanni also states that the book would be useful for parents, school board members and policy makers. Because I have been involved in the education process from the teaching side of education, I see this book as being of particular val ue to teachers as well. Overall, this book is for anyone who cares about improving the leadership in our schools. The Scope of the Book: The aspects of leadership covered are broad, from analyzing the traditional leadership roles, to the tapping of higher levels of human potential. It is written from the standpoint of managers or leaders and covers point by point the author's ideas of how to shift the environment of schools from that of a "factory" to one of a â€Å"learning community. Sergiovanni discusses "living school" in leadership rather than just being concerned with the facts and figures involved in "playing school." The viewpoint of the author is being concerned about the leadership processes in schools that are presently accepted as the norm. Sergiovanni would like to see school leadership shift to one that is self-motivated by teachers who want to do a great job, not one where the teachers feel they have to as a result of dependency on "extrinsic" rewards. A school, he says, is a community with a shared sense of values and purpose. He describes a "virtuous schoo l" as one founded on the beliefs that a school must be a community, that this school community includes parents, teachers, students and other community members. He believes that every student can learn, that caring for the whole child is the key to academic success, and that mutual respect and positive expectations are the operating dynamics.

Conducting Scholarly Research Essay

Conducting Scholarly Research The following tutorials and information are mandatory, though no assignment is required to be submitted. The skills developed in these tutorials will be used throughout the nursing program. Evaluating the resources you use One of the major challenges today, with the sheer amount of information available at your fingertips via the Web, is determining the reliability of the information presented. It can be quite difficult to determine the quality, authenticity, and authority of the information you encounter. However, there are a number of tools and skills at your disposal that help to determine if the information you find is trustworthy and of academic quality. Watch the Evaluating Websites tutorial to learn more about how to determine the quality of information found on the Web. Review the tutorial: â€Å"Evaluating Websites,† located at http://tutorials.gcumedia.com/evaluatingWebTutorial/vp02.swf What makes a resource scholarly? Throughout your courses at GCU you will be encouraged to use scholarly resources to support your assignments and discussion questions. But what is a scholarly source? Simply put, a scholarly source is a resource or research created, published, and or written by scholars and professionals in a specific discipline. In addition, a scholarly source should have undergone rigorous fact checking and peer review to ensure the research and information presented is of strong academic quality. The bulk of scholarly resources can be found in books and academic and/or professional journals. A large majority of these are research based. A scholar or professional may publish articles in other resources, such as in magazines, newspapers, and even Web sites and blogs. However, these sources do not go through the rigorous fact checking that is expected from scholarly journals. This rigorous fact checking is called peer review. When a scholar or professional submits their article to be published the journal will send the article to another expert in the field to review the work. The reviewer will look to see that the quality is high, the research sound, and the  conclusions in line with the work presented. If it is approved, it will then be published in the journal. This process gives students like you the added confidence in the resource being used. How to find Scholarly Research The Web is filled with information and resources. It is possible to find scholarly articles and research on the Web. However, most will ask that you pay a fee to read the article. The GCU library has subscribed to a number of the journals so that you do not need to pay to read the research. These journals and articles are contained in collections called Databases. Some are multidisciplinary, but most are specific to a subject area. For instance, in nursing, the strongest databases include CINAHL, OVID, and the ProQuest Nursing & Allied Health Source. These can be found on the Nursing subject page in the GCU library. Watch the â€Å"GCU Library Walk Through Tutorial† to learn how to access the library and its vast resources. The â€Å"GCU Library Walk Through Tutorial† is located at http://tutorials.gcumedia.com/libraryWalkThrough/vp02.swf Watch the CINAHL Tutorial to learn more about how to specifically use this nursing specific database. Pay special attention to the section discussing subject headings. Learning to use tools like these will help you design effective search strategies and significantly reduce the time and frustration that comes with research. The CINAHL Tutorial is located at http://tutorials.gcumedia.com/CINAHLTutorial/vp02.swf The GCU library has a number of Librarians and staffed trained specifically to assist you with your research. Please contact them if you have questions or concerns with finding information. They can help walk you through the technical aspects of using a database and assist in developing search strategies that will enable you to find the information you need. Call them at 800.800.9776 ext. 6396641 or email them at using the form at http://library.gcu.edu/AskALibrarian Scholarly Writing Writing will be a large part of the work expected in this program. Scholarly writing can often be intimidating, but there are a number of resources GCU has provided to ease this strain and help you learn to write good scholarly papers. A key to scholarly writing is using evidence to support your arguments. The skills you learn as a researcher will aid you in your writing. The purpose of education is to build your knowledge and the purpose of academia is to contribute to and build the knowledge of the culture as a whole. By taking the research and writings of others and evaluating and adding it as essential pieces of your own research, you then move the knowledge of both yourself and the community to the next step. To enable this process, it is essential to cite where the information is found that is used in your papers. This is why scholars use citation styles, such as APA, to standardize how this is done and allow others to easily follow from where the information has come. This is, of course, in addition to the ethical reasons that argue that one should be acknowledged for the work that is done. Watch the tutorials below to learn more about scholarly writing and what resources are available to you. The Writing Center, located in the Student Success Center Writing in APA Tutorial http://tutorials.gcumedia.com/mediaElement/apa-6th-edition-tutorial/apa-6th-edition-tutorial-v1.1.html Plagiarism Tutorial http://tutorials.gcumedia.com/plagiarismVideo/vp02.swf LoudCloud Tutorial http://tutorials.gcumedia.com/studentWTCTutorial/vp02.swf The Writing Process Tutorial http://tutorials.gcumedia.com/writingProcessTutorial/vp02.swf The Center for Learning Advancement has a number of staff and tutors available to assist you in your academic writing. In addition they have a number of resources available at the click of a button. Find out more at

World Without Money

What is money? Money is a currency accepted as exchange for goods and services. It is just a piece of paper that everyone would envy. People are obsessed with money and many would kill for it – there is no reason why they would not. Some even choose money over their own family or friends. Money is the reason the world operates, Thousands of people are dying everyday in the world, and all people care about is how they should spend their money after making it. Since money is the reason the world operates, just imagine the world without money to spend. Money makes the world go around.Imagine the world without money; there will be no future. Not everything comes with a price tag, but money can buy people fame, power, and sometimes even a rescue to a life. Most of the wealthy people think that money is the most important aspect of life. Young adults in this generation believe that pursuing wealth will bring them happiness, having enough money is also an achievement now as a goal in life. This essay will discuss about how money affects people’s lives and minds. The cause of death in third-world countries is malnutrition, which leads to starvation and diseases.Money can lead to starvation, which can lead to death. Millions of people die after natural disasters, problems will occur such as shelter, food, and protection. The only solution to that is money, money will be able to buy them the food they need, but the problem is that they do not have enough money. Even their own government cannot help, either because the government is having a financial crisis and are completely broke or they are not willing to spend their last bit money on their own people. That is the reason why charities are involved.Despite the fact that they are already starving to death, some poor countries still have their own governments making them pay taxes. In Africa, one of the major disease is malaria, the causes of it all leads back to money. Why are Africans vulnerable to mosqui tos? That is because they do not have enough money to build proper homes, but USAID (Government agency providing humanitarian assistance) has provided millions of bed nets to avoid malaria; and that has decreased the amount of malaria happening in Africa and other countries (â€Å"House Holds Hang Up Mosquito Nets†. The government also pays the staffs of USAID; people really cannot live without money. Even writers back then, like Shakespeare, wrote about how money changed everything including the feelings one has for another; even in the past, all people cared about was money. For example, if a person was not rich enough, then that person’s lover’s parents wont approve of him or her. An example of that is Romeo & Juliet. People nowadays want more than what they need, that is the cause of greediness. People who are greedy have an excessive or rapacious desire, especially for wealth or possessions. People shop for things that are not necessary, more than half the people in Hong Kong are using an iPhone or an iPad, but it is not really necessary to buy an iPhone or iPad; the point of people buying an iPhone or an ipad is just to show people that they can afford an iPhone or an ipad. Greediness is in everyone, but some people are just greedier than others. Rich people tend to get greedier than others, and that explains why they are so rich. Hard work is required obviously but they do not share usually, because they are scared that their wealth will suddenly get stolen.The problem is once people have the money and power, people are going to want more of those, and then those people would want to become richer than the wealthiest. When people get wealthier, some of them start belittling the people who they think are worth less than them. When in fact, everyone should be equal it does not matter if people are rich or poor. People crave for money; it is okay to crave for money just as long as people do not turn greedy. Because all of that hard wor k will disappear once that person gets buried. Ang 2 Ang 2Researchers have found that countries with wealthier people tend to be happier than the ones who are poor. Rich people can afford fully furnished house that will make them happy, but on the other hand, poor people can barely even afford enough food to feed their own family; that would not make them happy will it now. Can money buy happiness? Yes, money can buy Ang 3 Ang 3 happiness. Money can buy people enough satisfaction in life, but they just want more and more. Once a person gets what they want then that person will want more again, it is like a cycle.They want to have more than what other people have, and it ends up as a competition of who’s the richest. When all that money spent on useless items can be donated to charities with much more necessities. Money can buy happiness in so many ways; like riding a first class in the plane or going on vacation with the whole family while staying in a five star hotel. In som e cases though, money can only buy happiness in a short period of time. When people loose the person they love, they cannot buy that persons life.What people can do in order to forget is to use a little bit of money to have fun, like maybe buying a pint of ice cream or a box of chocolate’s might cheer a person up. Money also cannot buy love, a lot of people now are treating love as if it is a game, and all they are targeting is the money; so people should not get tricked by the ones who they think really loves them because people might also use wealthier people for the money they have. Good schools lead to brighter futures, and in order to get into good schools people need to have the money to get in; unless that person is smart and gets a scholarship.People usually want to go to international schools so that they can get into good universities in the future, kids who’s parents do not have enough money usually get sent to public schools where they do not learn as much as international schools, so meaning they wont get into good universities. People who get into good universities need money or connections, unless they get a scholarship; this is where bribing comes in. Usually if a person is rich they can sometimes just pay the head minister the amount of money they want and just get in.Though a lot of people who do quite good universities tend to become the millionaires in the end, such as Bill Gates and Steve Jobs. Money is a motivation for a lot of people, why do people think they want to go to a better university, its so that they can have a job that pays well. Steve Jobs built the first Apple laptop so that he can prove to his friends that his not just another nerd. Since that went successfully, Jobs thought that that would help him earn some money, and money motivated Ang 4 Ang 4 Jobs to create more of the advanced technologies we have today; such as the iPhone, ipad and MacBook.If money were not there to motivate people to work their brains, then the technologies would not have been as advanced as they today. Bibliography: This website talks about a group in the United States called the USAID who helps provide shelters or food for the countries in need. In this article, it talks about how USAID helps countries; they provided thousands of bed nets for thousands of Africans. This helps the essay because my essay mentions why money affects third world countries, because money can buy them food and a place to live. †About USAID. † USAID. N. P. , 11 Nov. 2011. Web. 1 Mar. 2012. This chapter of the book is about greediness, how people are becoming greedier because of money, and why money isn’t the most important thing on earth. People only think about money, and they stop focusing on other important aspects in life, like family and friends. This helps the essay because it talks about how it makes people greedier because of money and how money will change the way people think and act. Byrne, Rhonda. â€Å" The Secret To Money† The Secret. New York: Atria Books/Beyond Words, 2006. Print. This article is about how money can buy happiness.Researcher’s tried to see if wealthier people were happier than those who were less wealthy, and yes they were happier. This helps the essay because one of my paragraphs talks about whether money can buy happiness or not. â€Å"Can Money Buy Happiness? † CNNMoney. Cable News Network, 18 July 2006. Web. 11 Mar. 2012. This database is about how money buys almost everything in life and you need money to survive. It talks about how you need money to live because everyday you eat, and the only way to get food is to buy it with money. It helps with the essay because the essay is about how money can almost buy anything in life.Chamot, Dennis. â€Å"Money Matters. † Chemical & Engirneering News. 2008 (Apr. 2008): 55. Pubs. Acs. Web. 19 March. 2012. This article is about how money is what is motivating people try their best. It talks a bout the reasons why people takes opportunities, its so people can earn money from it. This helps because part of my essay is about how money can also motivate people into doing more work. The reason why our technologies are advancing now is because of money, because money is what is pushing people to do work or to work harder. Dewhurst, Martin. Guthridge, Matthew. Mohr, Elizabeth. Motivating People, Getting Beyond Money. † Mckinseyquarterly. Web. 11 Mar. 2012. Like the first citation, this article is about a group in the United States called USAID that helps people around the worlds. Households hang up mosquito nets is about USAID providing thousands of bed nets for the families in East Africa and saving their lives from preventing Malaria. This helps the essay because a part of the essay is about how money affects peoples lives and the employees of USAID are getting paid my the government, so without money, USAID would not have any employees. †Households Hang Up Mosqui to Nets. eastafrica. usaid. N. p. , 12 July. 2011. Web. 11 Mar. 2012. This book is about how a rich dad did not finish school but became a millionaire, while the poor dad finished university but ended up poor. It does relate to the essay because it talks about how money is still what motivates a person to work hard, like the rich dad in the book. What motivated him to quite school was because he knew he was going to be rich. Kiyosaki, Robert. Lechter, Sharon. Rich Dad Poor Dad. New York City: Warner Books Ed, 2001. Print. This database is about how money saved a natural disaster that happened in California.Which supported my claim of why money does save thousands of lives, because without money there wont be people helping out in natural disasters, since they get paid for helping. Maggs Ward, William. â€Å"Money for quakes. † Eos Trans. 70(45). Agu. Web. 19 March. 2012. This article is about why the society is becoming unfair, and people are becoming greedier. It also talks about how money does make the world go around, and why money makes people happy. It helps with the essay because the essay talks about greediness and how money affects happiness. Merkin, Daphne. â€Å"The Rich Aren't Like You and Me†¦ † Elle. 13 Sept. 2010. Web. 11 Mar. 2012.

Structural Functional Approach

Retrieved from: http://www. cifas. us/smith/chapters. html Title: â€Å"A structural approach to comparative politics. † Author(s): M. G. Smith Source: In Varieties of Political Theory. David Easton, ed. Englewood Cliffs, NJ: Prentice-Hall. p. 113-128. Reprinted in Corporations and Society. p. 91-105. FIVE M. G. SMITH University of California, Los Angeles A Structural Approach to Comparative Politics Comparative politics seeks to discover regularities and variations of political organization by comparative analysis of historical and contemporary systems.Having isolated these regularities and variations, it seeks to determine the factors which underlie them, in order to discover the properties and conditions of polities of varying types. It then seeks to reduce these observations to a series of interconnected propositions applicable to all these systems in both static and changing conditions. Hopefully, one can then enquire how these governmental processes relate to the wider m ilieux of which they are part. It would seem that this comparative enquiry may be pursued i~. various ways that all share the same basic strategy, but differ in emphases arid sta~ ­ ing points.Their common strategy is to abstract one aspect of political reality and develop it as a frame of reference. With this variable held constant, enquiries can seek to determine the limits within which other dimensions vary; as the value of the primary variable is changed, the forms and values of the others, separately or together, can also be investigated. Ideally, we should seek to deduce relevant hypotheses from a general body of theory, and then to check and refine them by inductive analyses of historical and ethnographic data. ActuaJ procedures vary. 113 114 /A STRUCTURAL APPROACH TO COMPARATIVE POLITICS Initially, we might expect anyone of four approaches to be useful in the comparative study of political systems. These four approaches use respectively the dimensions of process, content, function, and form as the bases for their conceptual frameworks. In fact, cOlIlparative studies based on process and content face insuperable obstacles due to the enormous variability of political systems. In centralized polities, the institutional processes of government are elaborately differentiated, discrete, and easy to identify.They are often the subject, as well as the source, of a more or less complex and precise body of rules which may require specialists to interpret them. In simpler societies, the corresponding processes are rarely differentiated and discrete. They normally occur within the context of institutional activities with multiple functions, and are often difficult to abstract and segregate for analysis as self-contained processual systems. Before this is possible, we need independent criteria to distinguish the governmental and nongovernmental dimensions of these institutional forms.The substantive approach rests on the category of content. By the con.. tent of a governmental system, I mean its specific substantive concerns and resources, whether material, human, or symbolic. As a rule, the more differentiated and complex the governmental processes are, the greater the range and complexity of content. This follows because the content and processes of government vary together. Since both these frameworks are interdependent and derivative, both presuppose independent criteria for identifying government. The functional approach avoids these limitations.It defines government functionally as all those activities which influence â€Å"the way in which authoritative decisions are formulated and executed for a society. â€Å"l From this starting point, various refined conceptual schemes can be developed. As requisites or implications of these decisional processes, David Easton identifies five modes of action as necessary elements of all political systems: legislation, administration, adjudication, the development of demands, and the development of support and solidarity. They may be grouped as input and output requisites of governmental systems.According to Almond, the universally necessary inputs are political socialization and recruitment, interest articulation, interest aggregation, and political communication. As outputs, he states that rule making, rule application, and rule adjudication are all universa1. 2 Neither of these categorical schemes specifies foreign relations and defense, which are two very general governmental concerns; nor is it easy to see how these schemes could accommodate political processes in non-societal units. Such deductive models suffer from certain inexplicit assumptions with1David Easton, â€Å"An Approach to the Analysis of Political Systems,† World Politics, IX, No. 3 (1957), 384. 2 Gabriel Almond, â€Å"Introduction† to Almond and James S. Coleman, The Politics of the Developing Areas (Princeton: Princeton University Press, 1961). A STRUCTURAL APPROACH TO COMPARATIVE POLITIC S / 115 out which the initial exclusive stress on political functions might be im- . possible. But despite their universal claims, it remains to be shown that Bushmen, Pygmies, or Eskimos have governments which are functionally homologous with those of the United States and the Soviet Union.Legislation, rule adjudication, and interest articulation are categories appropriate to the discussion of complex, modern polities rather than simple, primitive ones. But the problem which faces the student of comparative politics is to develop a conceptual framework useful and applicable to all. To impute the features and conditions of modern polities to the less differentiated primitive systems is virtually to abandon the central problem of comparative politics. The functional approach, as usually presented, suffers from a further defect: It assumes a rather special ensemble of structural conditions.When â€Å"authoritative decisions are formulated and executed for a society,† this unit must be territorially delimited and politically centralized. The mode of centralization should also endow government with â€Å"more-or-Iess legitimate physical compulsion. â€Å"3 In short, the reality to which the model refers is the modern nation-state. By such criteria, ethnography shows that the boundaries of many societies are fluctuating and obscure, and that the authoritative status of decisions made in and for them are even more so.Clearly bounded societies with centralized authority systems are perhaps a small minority of the polities with which we have to deal. A structural approach free of these functional presumptions may thus be useful, but only if it can accommodate the full range of political systems and elucidate the principles which underlie their variety. In this paper, I shall only indicate the broad outlines of this approach. I hope to present it more fully in the future. Government is the regulation of public affairs.This regulation is a set of processes whic h defines government functionally, and which also identifies its content as the affairs which are regulated, and the resources used to regulate them. It does not seem useful or necessary to begin a comparative study of governmental systems by deductive theories which predicate their minimum universal content, requisites, or features. The critical element in government is its public character. Without a public, there can be neither public affairs nor processes to regulate them.Moreover, while all governments presuppose publics, all publics have governments for the management of their affairs. The nature of these publics is therefore the first object of study. Publics vary in scale, composition, and character, and it is reasonable to suppose that their common affairs and regulatory arrangements will vary correspondingly. The first task of a structural approach to comparative politics is thus to identify the properties of a public and to indicate the principal varieties and bases of pu blics. 3 Almond, â€Å"Introduction,† p. . 116 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS As I use the term, public does not include mobs, crowds, casual assemblies, or mass-communication audiences. It does not refer to such categories as resident aliens, the ill, aged, or unwed, or to those social segments which lack common affairs and organized procedures to regulate them-for example, slaves, some clans, and unenfranchised strata such as the medieval serfs or the harijans of India. Such categories are part of one or more publics; they are not separate publics of their own.For example, in an Indian village, a medieval manor, or a slave plantation, members of the disprivileged categories constitute a public only if they form an enduring group having certain common affairs and the organization and autonomy necessary to regulate them; but the existence of such local publics is not in itself sufficient for the strata from which their memberships are drawn to have the status of publics. For this to be the case, these local publics must be organized into a single group co-extensive with the stratum. With such organization, we shall expect to find a set of common affairs and procedures to regulate them.The organization is itself an important common affair and a system of institutional procedures. By a public, then, I mean an enduring, presumably perpetual group with determinate boundaries and membership, having an internal organization and a unitary set of external relations, an exclusive body of common affairs, and autonomy and procedures adequate to regulate them. It will be evident that a public can neither come into being nor maintain its existence without some set of procedures by which it regulates its internal and external affairs. These procedures together form the governmental process of the public.Mobs, crowds, and audiences are not publics, because they lack presumptive continuity, internal organization, common affairs, procedures, and autonom y. For this reason, they also lack the determinate boundaries and membership which are essential for a durable group. While the categories mentioned above are fixed and durable, they also lack the internal organization and procedures which constitute a group. When groups are constituted so that their continuity, identity, autonomy, organization, and exclusive affairs are not disturbed by the entrance or exit of their individual members, they have the character of a public.The city of Santa Monica shares these properties with the United States, the Roman Catholic Church, Bushman bands, the dominant caste of an Indian village, the Mende Pora, an African lineage, a Nahuatl or Slavonic village community, Galla and Kikuyu age-sets, societies among the Crow and Hidatsa Indians, universities, medieval guilds, chartered companies, regiments, and such â€Å"voluntary† associations as the Yoruba Ogboni, the Yako lkpungkara, and the American Medical Association. The units just listed ar e all publics and all are corporate groups; the governmental process inherent in publics is a feature of all corporate groups.Corporate groups-Maine's â€Å"corporations aggregate†-are one species of â€Å"perfect† or fully-fledged corporation, the other being the â€Å"corporation A STRUCTURAL APPROACH TO COMPARATIVE POLITICS / 117 sole† exemplified by such offices as the American Presidency, the British Crown, the Papacy, governorships, chieftaincies, and university chancellorships. Corporations sole and corporate groups share the following characteristics, all of which are necessary for â€Å"perfect† or full corporate status: identity, presumed perpetuity, closure and membership, autonomy within a given sphere, exclusive common affairs, set procedures, and organization.The first four of these qualities are formal and primarily external in their reference; they define the unit in relation to its context. The last four conditions are processual and func tional, and primarily internal in their reference. The main differences between corporations sole and corporate groups are structural, though developmental differences are also important. Corporate groups are pluralities to which an unchanging unity is ascribed; viewed externally, each forms â€Å"one person,† as Fortes characterized the Ashanti matrilineages. This external indivisibility of the corporate group is not merely a jural postulate. It inevitably presumes and involves governmental processes within the group. In contrast with a corporate group, an office is a unique status having only one incumbent at any given time. Nonetheless, successive holders of a common office are often conceived of and addressed as a group. The present incumbent is merely one link in a chain of indefinite extent, the temporary custodian of all the properties, powers, and privileges which constitute the office.As such, incumbents may legitimately seek to aggrandize their offices at the expens e of similar units or of the publics to which these offices relate; but they are not personally authorized to alienate or reduce the rights and powers of the status temporarily entrusted to them. The distinction between the capital of an enterprise and the personalty of its owners is similar to the distinction between the office and its incumbent. It is this distinction that enables us to distinguish ffices from other personal statuses most easily. It is very possible that in social evolution the corporate group preceded the corporation sole. However, once authority is adequately centralized, offices tend to become dominant; and then we often find that offices are instituted in advance of the publics they will regulate or represent, as, for example, when autocrats order the establishment of new towns, settlements, or colonies under officials designated to set up and administer them.There are many instances in which corporate groups and offices emerge and develop in harmony and congr uence, and both may often lapse at once as, for example, when a given public is conquered and assimilated. These developmental relations are merely one aspect of the very variable but fundamental relation between offices and corporate groups. Despite Weber, there are a wide range of corporate groups which lack stable leaders, 4 Meyer Fortes, â€Å"Kinship and Marriage among the Ashanti,† in African Sys- tems of Kinship and Marriage, eds. A. R.Radcliffe-Brown and Daryll Forde (London: Oxford University Press, 1950), pp. 254-61. 118 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS much less official heads. Others may have senior members whose authority is at best advisory and representative; yet others have a definite council or an official head, or both. In many cases, we have to deal with a public constituted by a number of coordinate corporate groups of similar type. The senior members of these groups may form a collegial body to administer the common affairs of the public, w ith variable powers.Ibo and Indian village communities illustrate this well. In such contexts, where superordinate offices emerge, they often have a primarily sacred symbolic quality, as do the divine kingships of the Ngonde and Shilluk, but lack effective secular control. Between this extreme and an absolute despotism, there are a number of differing arrangements which only a comparative structural analysis may reduce to a single general order. Different writers stress different features of corporate organization, and sometimes employ these to â€Å"explain† these social forms.Weber, who recognizes the central role of corporate groups in political systems, fails to distinguish them adequately from offices (or â€Å"administrative organs,† as he calls them). 5 For Weber, corporate groups are defined by coordinated action under leaders who exercise de facto powers of command over them. The inadequacy of this view is patent when Barth employs it as the basis for denying to lineages and certain other units the corporate status they normally have, while reserving the term corporate for factions of a heterogeneous and contingent character. Maine, on the other hand, stresses the perpetuity of the corporation and its inalienable bundle of rights and obligations, the estate with which it is indentified. 7 For Gierke,s Durkheim,9 and Davis,10 corporate groups are identified by their common will, collective conscienc~, and group personality. For Goody, only named groups holding material property in common are corporate. 1! These definitions all suffer from overemphasis on some elements, and corresponding inattention to others. The common action characteristic of corporate groups rarely embraces the application of violence which both Weber and Barth seem to stress.Mass violence often proceeds independ5 Max Weber, The Theory of Social and Economic Organization, trans. A. R. Henderson and Talcott Parsons (London: Wm. Hodge & Co. , 1947), pp. 133-37, 302-5. 6 Fredrik Barth, Political Leadership among Swat Pathans. Monographs in Social Anthropology, London School of Economics, No. 19 (London: University of London Press, 1959). 7 H. S. Maine, Ancient Law (London: Routledge & Kegan Paul, Ltd. , 1904), p. 155. S Otto Gierke, Natural Law and the Theory of Society, 1500 to 1800, trans. Ernest Barker (Boston: Beacon Press, 1957). Emile Durkheim, The Division of Labour in Society, trans. George E. Simpson (New York: Free Press of Glencoe, Inc. , 1933). 10 John P. Davis, Corporations (New York: Capricorn Books, 1961), p. 34. 11 Jack Goody, â€Å"The Classification of Double Descent Systems,† Current Anthropology; II, No. 1 (1961), 5, 22-3. A STRUCTURAL APPROACH TO COMPARATIVE POLITICS / 119 ently of corporate groups. Corporate action is typically action to regulate corporate affairs-that is, to exercise and protect corporate rights, to enforce corporate obligations, and to allocate corporate responsibilities and privileges.When a group hol ds a common estate, this tenure and its exercise inevitably involve corporate action, as does any ritual in which the members or representatives of the group engage as a unit. Even the maintenance of the group's identity and closure entails modes of corporate action, the complexity and implications of which vary with the situation. It is thus quite fallacious to identify corporate action solely with coordinated physical movements. A chorus is not a corporate group.The presumed perpetuity, boundedness, determinate membership, and identity of a corporation, all more or less clearly entail one another, as do its requisite features of autonomy, organization, procedure, and common affairs. It is largely because of this interdependence and circularity among their elements that corporations die so hard; but by the same token, none of these elements alone can constitute or maintain a corporation. An office persists as a unit even if it is not occupied, providing that the corpus of rights, r esponsibilities, and powers which constitute it still persists.To modify or eliminate the office, it is necessary to modify. or eliminate its content. Among ! Kung bushmen, bands persist as corporate groups even when they have no members or heads12 ; these bands are units holding an inalienable estate of water holes, veldkos areas, etc. , and constitute the fixed points of ! Kung geography and society. The Bushman's world being constituted by corporate bands, the reconstitution of these bands is unavoidable, whenever their dissolution makes this necessary.As units which are each defined by an exclusive universitas juris, corporations provide the frameworks of law and authoritative regulation for the societies that they constitute. The corporate estate includes rights in the persons of its members as well as in material or incorporeal goods. In simpler societies, the bulk of substantive law consists in these systems of corporate right and obligation, and includes the conditions and c orrelates of membership in corporate groups of differing type. In such societies, adjectival law consists in the usual modes of corporate procedure. To a much greater extent than is commonly ealized, this is also the case with modern societies. The persistence, internal autonomy, and structural uniformity of the corporations which constitute the society ensure corresponding uniformity in its jural rules and their regular application over space and time. As modal units of social process and structure, corporations provide the framework in which the jural aspects of social relations are defined and enforced. Tribunals are merely functionally specific corporations charged with handling issues of certain kinds. Neither tribunals nor â€Å"the systematic ap12 Lorna Marshall, â€Å"! Kung Bushmen Bands,† A/rica, XXX (1960), 325- 5). 120 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS plication of the force of politically organized society†13 are necessary or sufficient for t he establishment of law. The law of a primitive society consists in its traditional procedures and modes of corporate action, and is implicit in the traditional rights, obligations, and conditions of corporate membership. In such societies, units which hold the same type of corporate estate are structurally homologous, and are generally articulated in such a way that each depends on the tacit recognition or active support of its fellows to maintain and enjoy its estate.Thus, in these simpler systems, social order consists in the regulation of relations between the constitutive corporations as well as within them. In societies which lack central political organs, societal boundaries coincide with the maximum range of an identical corporate constitution, on the articulation of which the social order depends. Though the component corporations are all discrete, they are also interdependent. But they may be linked together in a number of different ways, with consequent differences in the ir social systems.In some cases, functionally distinct corporations may be classified together in purely formal categories, such as moieties, clans, or castes. The Kagoro of northern Nigeria illustrate this. 14 In other cases, corporations which are formally and functionally distinct may form a wider public having certain common interests and affairs. The LoDagaba of northern Ghana and Upper Volta are an example. 15 In still other cases, corporations are linked individually to one another in a complex series of alliances and associations, with overlapping margins in such a way that they all are related, directly or indirectly, in the same network.Fortes has given us a very detailed analysis of such a system among the Tallensi. 16 However they are articulated in societies which lack central institutions, it is the extensive replication of these corporate forms which defines the unit as a separate system. Institutional uniformities, which include similarities of organization, ideology , and procedure, are quite sufficient to give these acephalous societies systemic unity, even where, as among the Kachins of Burma, competing institutional forms divide the allegiance of their members. 7 To say that corporations provide the frameworks of primitive law, and that the tribunals of modem societies are also corporate forms, is simply to say that corporations are the central agencies for the regulation of public affairs, being themselves each a separate public or organ, administering certain affairs, and together constituting wider publics or associations of publics 13 Roscoe Pound, Readings on the History and System 0/ the Common Law, 2nd ed. (Boston: Dunster House Bookshop, 1913), p. 4. 14 M. G.Smith, â€Å"Kagoro Political Development,† Human Organization, XIX, No. 3 (1960), 37-49. 15 Jack Goody, â€Å"Fields of Social Control among the LoDagaba,† Journal of the Royal Anthropological Institute, LXXXVII, Part I (1957),75-104. 16 Meyer Fortes, The Dynamics 0/ Clanship among the Tallensi (London: Oxford University Press, 1945). 17 E. R. Leach, Political Systems of Highland Burma (London: G. Bell & Sons, Ltd. , 1954). A STRUCTURAL APPROACH TO COMPARATIVE POLITICS / 121 for others. By the same token, they are the sources or frameworks of disorder.In some acephalous societies, disorder seems more or less perennial, and consists mainly in strife within and between corporations. Centralization, despite its merits, does not really exclude disorder. In concentrating authority, it simultaneously concentrates the vulnerability of the system. Accordingly, in centralized societies, serious conflicts revolve around the central regulative structures, as, for instance, in secessionist or revolutionary struggles, dynastic or religious wars, and â€Å"rituals of rebellion. â€Å"18 Such conflicts with or for central power normally affect the entire social body.In acephalous societies, on the other hand, conflicts over the regime may proceed in one r egion without implicating the others. 19 In both the centralized and decentralized systems, the sources and objects of conflict are generally corporate. Careful study of Barth's account of the Swat Pathans shows that this is true for them also, although the aggregates directly contraposed are factions and blocs. 20 Societal differences in the scale, type, and degree of order and coordination, or in the frequency, occasions, and forms of social conflict are important data and problems for political science.To analyze them adequately, one must use a comparative structural approach. Briefly, recent work suggests that the quality and modes of order in any social system reflect its corporate constitution-that is, the variety of corporate types which constitute it, their distinctive bases and properties, and the way in which they are related to one another. The variability of political systems which derives from this condition is far more complex and interesting than the traditional dicho tomy of centralized and noncentralized systems would suggest.I have already indicated some important typological differences within the category of acephalous societies; equally significant differences within the centralized category are familiar to all. This traditional dichotomy assumes that centralization has a relatively clear meaning, from which a single, inclusive scale may be directly derived. This assumption subsumes a range of problems which require careful study; but in any event, centralization is merely one aspect of political organization, and not necessarily the most revealing.Given variability in the relations between corporations sole and corporate groups, and in their bases and forms, it seems more useful to distinguish systems according to their structural simplicity or complexity, by reference to · the variety of corporate units of differing forms, bases, and functions which they contain, and the principles which serve to articulate them. Patently, such differen ces in composition imply differences in the relational networks in which these corporations articulate. Such ifferences in structural composition simultaneously describe the variety of political forms 18 Max Gluckman, Rituals of Rebellion in South East Africa (Manchester: Manchester University Press, 1954); â€Å"Introduction† to Gluckman, Order and Rebellion in Tribal Africa (London: Cohen & West, 1963). 19 Leach, Political Systems 0/ Highland Burma. 20 Barth, Political Leadership among Swat Pathans. 122 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS and processes, and explain differences in the scale, order, and coordination of polities.This is so because corporate organization provides the framework, content, and procedures for the regulation of public affairs. For this reason, the analysis of corporate structure should be the first task in the case study of a political system and in comparative work. For many political scientists, the concept of sovereignty is essential as the foundation of governmental order and autonomy. In my view, this notion is best dispensed with. It is a hindrance rather than a help to analysis, an unhappy solution of a very real problem which has been poorly formulated. In a system of sovereign states, no state is sovereign.As etymology shows, the idea of sovereignty derives from the historically antecedent condition of personal dominion such as kingship, and simply generalizes the essential features of this form as an ideology appropriate to legitimate and guide other forms of centralization. The real problem with which the notion of sovereignty deals is the relation between autonomy and coordination. As the fundamental myth of the modern nation-state, the concept is undoubtedly important in the study of these states; its historical or analytical usefulness is otherwise very doubtful.It seems best to formulate the problems of simultaneous coordination and autonomy in neutral terms. As units administering exclusive common a ffairs, corporations presuppose well-defined spheres and levels of autonomy, which are generally no more nor less than the affairs of these units require for their adequate regulation. Where a corporation fully subsumes all the juridical rights of its members so that their corporate identification is exclusive and lifelong, the tendencies toward autarchy are generally greatest, the stress on internal autonomy most pronounced, and relations between corporations most brittle.This seems to be the case with certain types of segmentary lineage systems, such as the Tallensi. Yet even in these conditions, and perhaps to cope with them, we usually find institutional bonds of various types such as ritual cooperation, local community, intermarriage, clanship, and kinship which serve to bind the autarchic individual units into a series of wider publics, or a set of dyadic or triadic associations, the members of which belong to several such publics simultaneously.Weber's classification of corpo rate groups as heteronomous or autonomous, heterocephalous or autocephalous, touches only those aspects of this problem in which he was directly interested. 21 We need also to analyze and compare differing levels, types, and degrees of autonomy and dependence in differing social spheres and situations. From comparative studies of these problems, we may hope to derive precise hypotheses about the conditions and limits of corporate autonomy and articulation in systems of differing composition and span. These hypotheses should also illuminate the conditions and limits of social disorder.Besides the â€Å"perfect† or fully-fledged corporations, offices and corpo21 Weber, Theory 0/ Social and Economic Organization, pp. 135-36. A STRUCTURAL APPROACH TO COMPARATIVE POLITICS / 123 rate groups, there are â€Å"imperfect† quasicorporations with must also be studied explicitly. The two main forms here are the corporate category and the commission. A corporate category is a clearl y bounded, identifiable, and permanent aggregate which differs from the corporate group in lacking exclusive common affairs, autonomy, procedures adequate for their regulation, and the internal organization which constitutes the group.Viewed externally, acephalous societies may be regarded as corporate categories in their geographical contexts, since each lacks a single inclusive frame of organization. But they are categories of a rather special type, since, as we have seen, their institutional uniformity provides an effective basis for functional unity. In medieval Europe, serfs formed a corporate category even though on particular manors they may have formed corporate groups.Among the Turkana22 and Karimojong23 of East Africa, age-sets are corporate categories since they lack internal organization, exclusive affairs, distinctive procedures, and autonomy. Among the nearby Kipsigi24 and Nandi25 clans are categorical units. These clans have names and identifying symbols, a determinat e membership recruited by agnatic descent, certain ritual and social prohibitions of which exogamy is most important, and continuity over time; but they lack internal organization, common affairs, procedures and autonomy to regulate them.Though they provide a set of categories into which all members of these societies are distributed, they never function as social groups. Not far to the south, in Ruanda, the subject Hutu caste formed a corporate category not so long ago. 26 This â€Å"caste† had a fixed membership, closure, easy identification, and formed a permanent structural unit in the Tutsi state. Rutu were excluded from the political process, as a category and almost to a man. They lacked any inclusive internal organization, exclusive affairs, autonomy, or procedures to regulate them.Under their Tutsi masters, they held the status of serfs; but when universal suffrage was recently introduced, Rutu enrolled in political parties such as the Parmehutu Aprosoma which succee ded in throwing off the Tutsi yoke and expelling the monarchy. 27 In order to become corporate groups, corporate categories need to develop an effective representative organization, such for instance as may now be emerging among American Negroes. In the American case, this corporate category is seeking to organize itself in order to remove the disprivileges which define it as a category.Some corporate 22 Philip Gulliver, â€Å"The Turkana Age Organization,† American Anthropologist, LX (1958), 900-922. 23 Neville Dyson-Hudson, to author, 1963. 24 J. G. Peristiany, The Social Institutions of the Kipsigis (London: Routledge & Kegan Paul, Ltd. , 1939). 25 G. W. B. Huntingford, The Nandi of Kenya (London: Routledge & Kegan Paul, Ltd. , 1953). 26 J. J. Maquet, The Premise of Inequality in Ruanda (London: Oxford University Press, 1960). 27 Marcel d'Hertefelt, â€Å"Les Elections Communales et Ie Consensus Politique au Rwanda,† Zaire, XIV, Nos. -6 (1960), 403-38. 124 / A STRUC TURAL APPROACH TO COMPARATIVE POLITICS categories are thus merely formal units lacking common functions; others are defined by common disabilities and burdens, though lacking common affairs. Under Islam, the dhimmi formed such a category; in India, so do the individual castes. The disabilities and prohibitions which define categories are not always directly political; they include exogamy and ritual taboos. Commissions differ from offices along lines which recall the differences between corporate categories and corporate groups.Like categories, commissions fall into two main classes: one class includes ad hoc and normally discontinuous capacities of a vaguely defined character, having diffuse or specific objects. The other class includes continuing series of indefinite number, the units of which are all defined in such general terms as to appear structurally and functionally equivalent and interchangeable. Familiar examples of the latter class are military commissions, magistracies, professorships, and priesthoods; but the sheiks and sa'ids of Islam belong here also.Examples of the first class, in which the powers exercised are unique but discontinuous and ill-defined, include parliamentary commissions of enquiry or other ad hoc commissions, and plenipotentiaries commissioned to negotiate special arrangements. In some societies, such as the Eskimo, Bushman, and Nuer, individuals having certain gifts may exercise informal commissions which derive support and authority from public opinion. The Nuer â€Å"bull,† prophet, and leopard-skin priests are examples. 28 Among the Eskimos, the shaman and the fearless hunter-warrior have similar positions. 9 The persistence of these commissions, despite turnover of personnel and their discontinuous action, is perhaps the best evidence of their importance in these social systems. For their immediate publics, such commissions personalize social values of high relevance and provide agencies for ad hoc regulation and gu idance of action. In these humble forms, we may perceive the seeds of modern bureaucracy. Commissions are especially important as regulatory agencies in social movements under charismatic leaders, and during periods of popular unrest.The charismatic leadership is itself merely the supreme directing commission. As occasion requires, the charismatic leader creates new commissions by delegating authority and power to chosen individuals for special tasks. The careers of Gandhi, Mohammed, Hitler, and Shehu Usumanu dan Fodio in Hausaland illustrate this pattern well. So does the organization and development of the various Melanesian â€Å"cargo cults. â€Å"30 But if the commission is to be institutionalized as a unit of permanent administration, its arbitrary 28 E. E. Evans-Pritchard, The Nuer (London: Oxford University Press, 940). 29 Kaj Birket-Smith, The Eskimo (London: Meuthuen & Co. , Ltd. , 1960); V. Stefansson, My Life with the Eskimo (New York: The Crowell-Collier Publishing Co . , 1962). 80 Peter Worsley, The Trumpet Shall Sound (London: McGibbon & Kee, 1957). A STRUCTURAL APPROACH TO COMPARATIVB POLma / 125 character must be replaced by set rules, procedures, and spheres of action; this institutionalization converts the commission into an office in the same way that its organization converts the corporate category into a corporate group.Moreover, in the processes by which corporate categories organize themselves as groups, charismatic leadership and its attached commissions are the critical agencies. The current movement for civil rights among American Negroes illustrates this neatly. Any given public may include offices, commissions, corporate categories, and corporate groups of differing bases and type. In studying governmental systems, we must therefore begin by identifying publics and analyzing their internal constitution as well as their external relationships in these terms.It is entirely a matter of convenience whether we choose to begin with the smallest units and work outwards to the limits of their relational systems, or to proceed in the opposite direction. Given equal thoroughness, the results should be the same in both cases. Any governmental unit is corporate, and any public may include, wholly or in part, a number of such corporations. These units and their interrelations together define the internal order and constitution of the public and its network of external relations.Both in the analysis of particular systems and in comparative work, we should therefore begin by determining the corporate composition of the public under study, by distinguishing its corporate groups, offices, commissions, and categories, and by defining their several properties and features. As already mentioned, we may find, in some acephalous societies, a series of linked publics with intercalary corporations and overlapping margins. We may also find that a single corporate form, such as the Mende Para or the Roman Catholic Church, cuts across a number of quite distinct and mutually independent publics.An alternative mode of integration depends on the simultaneous membership of individuals in several distinct corporations of differing constitution, interest and kind. Thus, an adult Yako81 simultaneously belongs to a patrilineage, a matrilineage, an age-set in his ward, the ward (which is a distinct corporate group), one or more functionally specific corporate associations at the ward or village level, and the village, which is the widest public. Such patterns of overlapping and dispersed membership may characterize both individuals and corporations equally.The corporations will then participate in several discrete publics, each with its exclusive affairs, autonomy, membership, and procedures, just as the individual participates in several corporations. It is this dispersed, multiple membership which is basic to societal unity, whether or not government is centralized. Even though the inclusive public with a centralized a uthority system is a corporate group, and a culturally distinct population 81Daryll Forde, Yako Studies (London: Oxford University Press, 1964); Kenneth Little, The -Mende of Sierra Leone (London: Routledge & Kegan Paul, Ltd. 1951). 126 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS without this remains a corporate category, functionally both aggregates derive their underlying unities from the same mechanism of crosscutting memberships, loyalties, and cleavages. In the structural study of a given political system, we must therefore define its corporate constitution, determine the principles on which these corporate forms are based, and see how they articulate with one another.In comparative study, we seek to determine what differences or uniformities of political process, content, and function correspond with observable differences or uniformities of corporate composition and articulation. For this purpose, we must isolate the structural principles on which the various types of cor porations are based in order to determine their requisites and implications, and to assess their congruence or discongruence. To indicate my meaning, it is sufficient to list the various principles on which corporate groups and categories may be based.These include sex, age, locality, ethnicity, descent, common property interests, ritual and belief, occupation, and â€Å"voluntary† association for diffuse or specific pursuits. Ethnographic data show that we shall rarely find corporate groups which are based exclusively on one of these principles. As a rule, their foundations combine two, three, or more principles, with corresponding complexity and stability in their organization. Thus, lineages are recruited and defined by descent, common property interests, and generally co-residence.Besides equivalence in age, age-sets presume sameness of sex and, for effective incorporation, local co-residence. Guilds typically stressed occupation and locality; but they were also united by property interests in common market facilities. In India, caste is incorporated on the principles of descent, ritual, and occupation. Clearly, differing combinations of these basic structural principles will give rise to corporations of differing type, complexity, and capacity; and these differences will also affect the content, functions, forms, and contextual relations of the units which incorporate them.It follows that differing combinations of these differing corporate forms underlie the observable differences of order and process in political organization. This is the broad hypothesis to which the comparative- structural study of political systems leads. It is eminently suited to verification or disproof. By the same token, uniformities in corporate composition and organization between, as well as within, societies should entail virtual identities of political process, content, and form.When, to the various possible forms of corporate group differentiated by the combination of structural principles on which they are based and by the relations to their corporate contexts which these entail, we add the other alternatives of office, commission, and category, themselves variable with respect to the principles which constitute them, we simultaneously itemize the principal elements which give rise to the variety of political forms, and the principles and methods by which we can reasonably hopeA STRUCTURAL APPROACH TO COMPARATIVE POLITICS / 127 to reduce them to a single general order. Since corporations are essential regulatory units of variable character, their different combinations encompass the entire range of variability of political systems on the functional, processual, and substantive, as well as on the structural levels. Within this structural framework, we may also examine the nature of the regulatory process, its constituents, modes, and objectives.The basic elements of regulation are authority and power. Though always interdependent and often combi ned, they should not be confused. As a regulatory capacity, authority is legitimated and identified by the rules, traditions, and precedents which embody it and which govern its exercise and objects. Power is also regulatory, but is neither fully prescribed nor governed by norms and rules. Whereas authority presumes and expresses normative consensus, power is most evident in conflict and contraposition where dissensus obtains.In systems of public regulation, these conditions of consent and dissent inevitably concur, although they vary in their forms, objects, and proportions. Such systems accordingly depend on the simultaneous exercise and interrelation of the power and authority with which they are identified. Structural analysis enables us to identify the various contexts in which these values and capacities appear, the forms they may take, the objectives they may pursue, and their typical relations with one another within as well as between corporate units.In a structurally homog eneous system based on replication of a single corporate form, the mode of corporate organization will canalize the authority structure and the issues of conflict. It will simultaneously determine the forms of congruence or incongruence between the separate corporate groups. In a structurally heterogeneous system having a variety of corporate forms, we shall also have to look for congruence or incongruence among corporations of differing types, and for interdependence or competition at the various structural levels.Any corporate group embodies a set of structures and procedures which enjoy authority. By definition, all corporations sole are such units. Within, around, and between corporations we shall expect to find recurrent disagreements over alternative courses of action, the interpretation and application of relevant rules, the allocation of positions, privileges and obligations, etc. These issues recurrently develop within the framework of corporate interests, and are settled b y direct or indirect exercise of authority and power.Few serious students now attempt to reduce political systems to the modality of power alone; but many, under Weber's influence, seek to analyze governments solely in terms of authority. Both alternatives are misleading. Our analysis simultaneously stresses the difference and the interdependence of authority and power. The greater the structural simplicity of a given system, that is, its dependence on replication of a single corporate form, such as the Bushman band or Tallensi lineage, the greater its decen- 28 / A STRUCTURAL APPROACH TO COMPARATIVE POLITICS tralization and the narrower the range in which authority and power may apply. The greater the heterogeneity of corporate types in a given system, the greater the number of levels on which authority and power are simultaneously requisite and manifest, and the more critical their congruence for the integration of the system as a whole.